Neoprene iced coffee sleeve first-order guide for US specialty coffee retailers

If you run a roastery shop, a café merch counter, or the online store that sits beside them, start with the cup you actually sell. The sleeves are for iced coffee and other cold-drink cups only. White is not stocked in Medium (22–24 oz).
Show the construction already in the first photo
The print and the construction are two separate decisions. You can add a seasonal motif without changing supplier, but a generic photo will not tell a buyer whether the piece is closed-bottom, bottomless, bound-handle, unbound-handle, or made with a removable shoulder strap. If you sell more than one construction, each one needs at least one photo of its own.
The usual standard thickness is 3.5 mm neoprene; other thicknesses can be specified in the order. Printing is by sublimation, screen printing, or a solid color with no print. The neoprene material is SGS/RoHS tested. Packaging is quoted separately: loose in the carton, an individual bag, or retail-ready packing.

Another sample print: a cow-print closed-bottom sleeve on a clear cold cup. Useful when you compare the fit before you photograph a product page. Not a solid-white Medium photo.
Measure the cup you actually sell
Do not rely on a store label such as “medium cup.” Measure the cup that actually goes with the drink you sell, or the cup that appears in the product photo. For a specialty coffee retailer in the United States, many cups are marked in ounces; the factory’s reference figures are given in ounces and centimetres.
Three details are enough for a first email: (1) the height of the cup, or the band the sleeve should cover, (2) the outside diameter of the bottom, and (3) a photo of the cup with its lid. The table applies to closed-bottom sleeves.
Closed-bottom neoprene iced coffee sleeves — factory reference sizes
Size | Reference cup | Approx. ml (conversion) | Height | Bottom diameter |
|---|---|---|---|---|
Small (S) | 16–18 oz | about 473–532 ml | 10.5 cm | 6.3 cm |
Medium (M) | 22–24 oz | about 650–710 ml | 13 cm | 6.5 cm |
Large (L) | 32 oz | about 946 ml | 15 cm | 6.8 cm |
The millilitre figures are approximate conversions from U.S. fluid ounces, not a separate factory standard. These centimetre figures apply to closed-bottom sleeves. Bottomless sleeves have two sizes — a combined S/M and L — and do not use the centimetre values in the table; confirm the size on your own cup. White is not stocked in Medium (22–24 oz).
If you want the factory to confirm S, M or L before a first 100-piece order, email sales2@ediom.net with the cup height, the outside bottom diameter, and a photo of the cup with its lid. You can also start from the custom neoprene iced coffee sleeve product page or the EDIOM homepage.
Name the construction on the product page
If you sell more than one construction, it is usually clearer to separate them as variations or as separate products, so a buyer in your online shop — or a viewer in a live stream — does not have to guess from a mixed gallery. The overview below shows four constructions in the same print family. The fifth construction is the standard closed-bottom sleeve, which is the one ordered most often.

Corrected overview of four constructions (shorter body on the bottomless version). Use it as a visual key when you name the construction, not as a substitute for checking the fit on your own cup.

Three sample closed-bottom prints on clear cups, photographed outdoors. Examples only, not a ranking of best-selling designs. White is not stocked in Medium (22–24 oz).
A photo checklist for the product gallery — and for a live demo
A buyer in an online shop, and a viewer in a live stream, will usually zoom in. Put at least the seam and the top and bottom binding in the gallery. If you offer a shoulder-strap or a bound-handle construction, include that attachment in a photo of its own. The sleeve in the photo should be the same construction and the same size as the product you are selling.
Main image: the sleeve on the actual cup you sell, with the lid on, so the construction is visible.
Gallery: a close-up of the seam, a close-up of the binding, and, if you offer a handle or a strap, a photo of that part.
One hand-held or on-cup shot that shows this is a cold drink.
Do not mix constructions in a single variation.
Use the same size in the photo that you name in the title and the bullet list.

A bound-handle construction on a clear cup. If you offer this style, give it its own photo so a buyer does not have to guess from a standard closed-bottom shot.
The first order, without tying up too much stock
Check the fit on a stock piece first. Stock sleeves can be ordered from 1 piece, in mixed prints, so you can check the fit on the cup you actually sell and shoot the product photos before you lock in a 100-piece lot.
Commit lots deliberately. Each design × each size is a 100-piece lot. A different bottom color counts as a separate design. It is usually safer to reorder one lot than to warehouse three whose sell-through you do not yet know.
File and sample. An editable Illustrator file (AI) or a PDF is best; a high-resolution JPG or PNG can also be reviewed. Send only artwork you have the right to use.
Packaging. Loose in the carton, an individual bag, or retail-ready packing: each path is priced separately. The photograph below is a real individual OPP bag, not an export carton and not retail-ready packing with a header card.
Shipping. Freight is quoted separately. Say where the goods should ship in your email. This page does not set a lead time or a route.
Color and print are confirmed when you request a quote. White is not stocked in Medium (22–24 oz).

A real photograph of the individual OPP bag / clear bag. Do not use it in place of an export carton, and do not present it as retail-ready packing with a header card.
Figures for your calculation
Minimum order: 100 pieces per design per size. Printing and freight are quoted separately. Constructions and sizes are also on the product page for custom neoprene iced coffee sleeves.
USD 0.85 / piece EXW at 100 pieces
USD 0.75 / piece EXW at 1,000 pieces
Common questions
My cups are marked only in ounces. What should I send?
Send the ounce figure together with the height, the outside bottom diameter, and a photo of the cup with its lid. If you also have a millilitre figure, include that too. The millilitre figures in the table are conversions, not a separate factory standard.
Which drinks are the sleeves for?
Iced coffee and other cold-drink cups only.
Which colors and prints are in stock?
Color and print availability is confirmed when you request a quote. White is not stocked in Medium (22–24 oz).
Can I sell these in my own shop, on a marketplace, or in a live stream?
Yes. You can sell the goods in a specialty shop, in your own online store, on a marketplace, or in a live stream. Whether a given listing meets the rules of that service is for you to determine. Live-stream merch is a secondary use of the same sizes on this page.
What file do you need for a custom print?
An editable Illustrator file (AI) or a PDF is best; a high-resolution JPG or PNG can also be reviewed. Send only artwork you have the right to use.
Is the sleeve itself SGS or RoHS certified?
The neoprene material is SGS/RoHS tested. If you need the material test reports, ask when you request a quote.
Can I resell a stock sample under my own shop name?
Stock samples can be resold unchanged. A custom logo or a woven label is a separate job.
Do you ship single pieces to end users?
This page covers stock and wholesale orders. If you need drop-shipping, email sales2@ediom.net.
Contact the factory
EDIOM SPORTS, Huizhou, China — founded in 2014. The founding team has worked with neoprene since 2008. To confirm S, M or L for a first 100-piece order, email sales2@ediom.net with the cup height, the outside bottom diameter, and a photo of the cup with its lid, plus the design, size and quantity. You can also use the iced coffee sleeve product page and www.ediom.com.cn.
Manufacturer identification
Huizhou Ediom Sports Co., Ltd. (EDIOM SPORTS)
2nd Floor, Building 1, Weihao Industrial Area, Tangxia, Chanjing Village, Xinxu Town, Huiyang District, Huizhou, Guangdong Province, China 516200
Contact: sales2@ediom.net
Website: https://www.ediom.com.cn/